Package obj
Overview ▸
Index ▸
Constants
Generate a sequence of opcodes that is as short as possible. See section 6.2.5
const (
LINE_BASE = -4
LINE_RANGE = 10
PC_RANGE = (255 - OPCODE_BASE) / LINE_RANGE
OPCODE_BASE = 11
)
Each architecture is allotted a distinct subspace of opcode values for declaring its arch-specific opcodes. Within this subspace, the first arch-specific opcode should be at offset A_ARCHSPECIFIC.
Subspaces are aligned to a power of two so opcodes can be masked with AMask and used as compact array indices.
const (
ABase386 = (1 + iota) << 11
ABaseARM
ABaseAMD64
ABasePPC64
ABaseARM64
ABaseMIPS
ABaseLoong64
ABaseRISCV
ABaseS390X
ABaseWasm
AllowedOpCodes = 1 << 11 // The number of opcodes available for any given architecture.
AMask = AllowedOpCodes - 1 // AND with this to use the opcode as an array index.
)
const (
// Don't profile the marked routine.
//
// Deprecated: Not implemented, do not use.
NOPROF = 1
// It is ok for the linker to get multiple of these symbols. It will
// pick one of the duplicates to use.
DUPOK = 2
// Don't insert stack check preamble.
NOSPLIT = 4
// Put this data in a read-only section.
RODATA = 8
// This data contains no pointers.
NOPTR = 16
// This is a wrapper function and should not count as
// disabling 'recover' or appear in tracebacks by default.
WRAPPER = 32
// This function uses its incoming context register.
NEEDCTXT = 64
// When passed to objw.Global, causes Local to be set to true on the LSym it creates.
LOCAL = 128
// Allocate a word of thread local storage and store the offset from the
// thread local base to the thread local storage in this variable.
TLSBSS = 256
// Do not insert instructions to allocate a stack frame for this function.
// Only valid on functions that declare a frame size of 0.
// TODO(mwhudson): only implemented for ppc64x at present.
NOFRAME = 512
// Function can call reflect.Type.Method or reflect.Type.MethodByName.
REFLECTMETHOD = 1024
// Function is the outermost frame of the call stack. Call stack unwinders
// should stop at this function.
TOPFRAME = 2048
// Function is an ABI wrapper.
ABIWRAPPER = 4096
// Function is a compiler-generated package init function.
PKGINIT = 8192
)
ARM scond byte
const (
C_SCOND = (1 << 4) - 1
C_SBIT = 1 << 4
C_PBIT = 1 << 5
C_WBIT = 1 << 6
C_FBIT = 1 << 7
C_UBIT = 1 << 7
C_SCOND_XOR = 14
)
const (
// Because of masking operations in the encodings, each register
// space should start at 0 modulo some power of 2.
RBase386 = 1 * 1024
RBaseAMD64 = 2 * 1024
RBaseARM = 3 * 1024
RBasePPC64 = 4 * 1024 // range [4k, 8k)
RBaseARM64 = 8 * 1024 // range [8k, 13k)
RBaseMIPS = 13 * 1024 // range [13k, 14k)
RBaseS390X = 14 * 1024 // range [14k, 15k)
RBaseRISCV = 15 * 1024 // range [15k, 16k)
RBaseWasm = 16 * 1024
RBaseLOONG64 = 17 * 1024
)
Each architecture is allotted a distinct subspace: [Lo, Hi) for declaring its arch-specific register list numbers.
const (
RegListARMLo = 0
RegListARMHi = 1 << 16
// arm64 uses the 60th bit to differentiate from other archs
RegListARM64Lo = 1 << 60
RegListARM64Hi = 1<<61 - 1
// x86 uses the 61th bit to differentiate from other archs
RegListX86Lo = 1 << 61
RegListX86Hi = 1<<62 - 1
)
const (
LOG = 5
)
const REG_NONE = 0
StaticNamePref is the prefix the front end applies to static temporary variables. When turned into LSyms, these can be tagged as static so as to avoid inserting them into the linker's name lookup tables.
const StaticNamePref = ".stmp_"
const UnlinkablePkg = "<unlinkable>" // invalid package path, used when compiled without -p flag
Variables
var Anames = []string{
"XXX",
"CALL",
"DUFFCOPY",
"DUFFZERO",
"END",
"FUNCDATA",
"JMP",
"NOP",
"PCALIGN",
"PCALIGNMAX",
"PCDATA",
"RET",
"GETCALLERPC",
"TEXT",
"UNDEF",
}
func AlignmentPadding ¶
func AlignmentPadding(pc int32, p *Prog, ctxt *Link, cursym *LSym) int
AlignmentPadding bytes to add to align code as requested. Alignment is restricted to powers of 2 between 8 and 2048 inclusive.
pc_: current offset in function, in bytes p: a PCALIGN or PCALIGNMAX prog ctxt: the context, for current function cursym: current function being assembled returns number of bytes of padding needed, updates minimum alignment for the function.
func AlignmentPaddingLength ¶
func AlignmentPaddingLength(pc int32, p *Prog, ctxt *Link) int
AlignmentPaddingLength is the number of bytes to add to align code as requested. Alignment is restricted to powers of 2 between 8 and 2048 inclusive. This only computes the length and does not update the (missing parameter) current function's own required alignment.
pc: current offset in function, in bytes p: a PCALIGN or PCALIGNMAX prog ctxt: the context, for current function returns number of bytes of padding needed,
func Bool2int ¶
func Bool2int(b bool) int
func CConv ¶
func CConv(s uint8) string
CConv formats opcode suffix bits (Prog.Scond).
func CConvARM ¶
func CConvARM(s uint8) string
CConvARM formats ARM opcode suffix bits (mostly condition codes).
func Dconv ¶
func Dconv(p *Prog, a *Addr) string
Dconv accepts an argument 'a' within a prog 'p' and returns a string with a formatted version of the argument.
func DconvWithABIDetail ¶
func DconvWithABIDetail(p *Prog, a *Addr) string
DconvWithABIDetail accepts an argument 'a' within a prog 'p' and returns a string with a formatted version of the argument, in which text symbols are rendered with explicit ABI selectors.
func Flushplist ¶
func Flushplist(ctxt *Link, plist *Plist, newprog ProgAlloc)
func MarkUnsafePoints ¶
func MarkUnsafePoints(ctxt *Link, p0 *Prog, newprog ProgAlloc, isUnsafePoint, isRestartable func(*Prog) bool)
MarkUnsafePoints inserts PCDATAs to mark nonpreemptible and restartable instruction sequences, based on isUnsafePoint and isRestartable predicate. p0 is the start of the instruction stream. isUnsafePoint(p) returns true if p is not safe for async preemption. isRestartable(p) returns true if we can restart at the start of p (this Prog) upon async preemption. (Currently multi-Prog restartable sequence is not supported.) isRestartable can be nil. In this case it is treated as always returning false. If isUnsafePoint(p) and isRestartable(p) are both true, it is treated as an unsafe point.
func Nopout ¶
func Nopout(p *Prog)
func RLconv ¶
func RLconv(list int64) string
func Rconv ¶
func Rconv(reg int) string
func RegisterOpSuffix ¶
func RegisterOpSuffix(arch string, cconv func(uint8) string)
RegisterOpSuffix assigns cconv function for formatting opcode suffixes when compiling for GOARCH=arch.
cconv is never called with 0 argument.
func RegisterOpcode ¶
func RegisterOpcode(lo As, Anames []string)
RegisterOpcode binds a list of instruction names to a given instruction number range.
func RegisterRegister ¶
func RegisterRegister(lo, hi int, Rconv func(int) string)
RegisterRegister binds a pretty-printer (Rconv) for register numbers to a given register number range. Lo is inclusive, hi exclusive (valid registers are lo through hi-1).
func RegisterRegisterList ¶
func RegisterRegisterList(lo, hi int64, rlconv func(int64) string)
RegisterRegisterList binds a pretty-printer (RLconv) for register list numbers to a given register list number range. Lo is inclusive, hi exclusive (valid register list are lo through hi-1).
func RegisterSpecialOperands ¶
func RegisterSpecialOperands(lo, hi int64, rlconv func(int64) string)
RegisterSpecialOperands binds a pretty-printer (SPCconv) for special operand numbers to a given special operand number range. Lo is inclusive, hi is exclusive (valid special operands are lo through hi-1).
func SPCconv ¶
func SPCconv(spc int64) string
SPCconv returns the string representation of the special operand spc.
func WriteDconv ¶
func WriteDconv(w io.Writer, p *Prog, a *Addr)
WriteDconv accepts an argument 'a' within a prog 'p' and writes a formatted version of the arg to the writer.
func WriteObjFile ¶
func WriteObjFile(ctxt *Link, b *bio.Writer)
Entry point of writing new object file.
type ABI ¶
ABI is the calling convention of a text symbol.
type ABI uint8
const (
// ABI0 is the stable stack-based ABI. It's important that the
// value of this is "0": we can't distinguish between
// references to data and ABI0 text symbols in assembly code,
// and hence this doesn't distinguish between symbols without
// an ABI and text symbols with ABI0.
ABI0 ABI = iota
// ABIInternal is the internal ABI that may change between Go
// versions. All Go functions use the internal ABI and the
// compiler generates wrappers for calls to and from other
// ABIs.
ABIInternal
ABICount
)
func ParseABI ¶
func ParseABI(abistr string) (ABI, bool)
ParseABI converts from a string representation in 'abistr' to the corresponding ABI value. Second return value is TRUE if the abi string is recognized, FALSE otherwise.
func (ABI) String ¶
func (i ABI) String() string
type ABISet ¶
ABISet is a bit set of ABI values.
type ABISet uint8
const (
// ABISetCallable is the set of all ABIs any function could
// potentially be called using.
ABISetCallable ABISet = (1 << ABI0) | (1 << ABIInternal)
)
func ABISetOf ¶
func ABISetOf(abi ABI) ABISet
func (*ABISet) Get ¶
func (a *ABISet) Get(abi ABI) bool
func (*ABISet) Set ¶
func (a *ABISet) Set(abi ABI, value bool)
func (ABISet) String ¶
func (a ABISet) String() string
type Addr ¶
type Addr struct {
Reg int16
Index int16
Scale int16 // Sometimes holds a register.
Type AddrType
Name AddrName
Class int8
Offset int64
Sym *LSym
// argument value:
// for TYPE_SCONST, a string
// for TYPE_FCONST, a float64
// for TYPE_BRANCH, a *Prog (optional)
// for TYPE_TEXTSIZE, an int32 (optional)
Val interface{}
}
func (*Addr) SetConst ¶
func (a *Addr) SetConst(v int64)
func (*Addr) SetTarget ¶
func (a *Addr) SetTarget(t *Prog)
func (*Addr) Target ¶
func (a *Addr) Target() *Prog
func (*Addr) WriteNameTo ¶
func (a *Addr) WriteNameTo(w io.Writer)
type AddrName ¶
type AddrName int8
const (
NAME_NONE AddrName = iota
NAME_EXTERN
NAME_STATIC
NAME_AUTO
NAME_PARAM
// A reference to name@GOT(SB) is a reference to the entry in the global offset
// table for 'name'.
NAME_GOTREF
// Indicates that this is a reference to a TOC anchor.
NAME_TOCREF
)
type AddrPos ¶
AddrPos indicates whether the operand is the source or the destination.
type AddrPos struct {
Addr
Pos OperandPos
}
type AddrType ¶
type AddrType uint8
const (
TYPE_NONE AddrType = iota
TYPE_BRANCH
TYPE_TEXTSIZE
TYPE_MEM
TYPE_CONST
TYPE_FCONST
TYPE_SCONST
TYPE_REG
TYPE_ADDR
TYPE_SHIFT
TYPE_REGREG
TYPE_REGREG2
TYPE_INDIR
TYPE_REGLIST
TYPE_SPECIAL
)
func (AddrType) String ¶
func (i AddrType) String() string
type As ¶
An As denotes an assembler opcode. There are some portable opcodes, declared here in package obj, that are common to all architectures. However, the majority of opcodes are arch-specific and are declared in their respective architecture's subpackage.
type As int16
These are the portable opcodes.
const (
AXXX As = iota
ACALL
ADUFFCOPY
ADUFFZERO
AEND
AFUNCDATA
AJMP
ANOP
APCALIGN
APCALIGNMAX // currently x86, amd64 and arm64
APCDATA
ARET
AGETCALLERPC
ATEXT
AUNDEF
A_ARCHSPECIFIC
)
func (As) String ¶
func (a As) String() string
type Attribute ¶
Attribute is a set of symbol attributes.
type Attribute uint32
const (
AttrDuplicateOK Attribute = 1 << iota
AttrCFunc
AttrNoSplit
AttrLeaf
AttrWrapper
AttrNeedCtxt
AttrNoFrame
AttrOnList
AttrStatic
// MakeTypelink means that the type should have an entry in the typelink table.
AttrMakeTypelink
// ReflectMethod means the function may call reflect.Type.Method or
// reflect.Type.MethodByName. Matching is imprecise (as reflect.Type
// can be used through a custom interface), so ReflectMethod may be
// set in some cases when the reflect package is not called.
//
// Used by the linker to determine what methods can be pruned.
AttrReflectMethod
// Local means make the symbol local even when compiling Go code to reference Go
// symbols in other shared libraries, as in this mode symbols are global by
// default. "local" here means in the sense of the dynamic linker, i.e. not
// visible outside of the module (shared library or executable) that contains its
// definition. (When not compiling to support Go shared libraries, all symbols are
// local in this sense unless there is a cgo_export_* directive).
AttrLocal
// For function symbols; indicates that the specified function was the
// target of an inline during compilation
AttrWasInlined
// Indexed indicates this symbol has been assigned with an index (when using the
// new object file format).
AttrIndexed
// Only applied on type descriptor symbols, UsedInIface indicates this type is
// converted to an interface.
//
// Used by the linker to determine what methods can be pruned.
AttrUsedInIface
// ContentAddressable indicates this is a content-addressable symbol.
AttrContentAddressable
// ABI wrapper is set for compiler-generated text symbols that
// convert between ABI0 and ABIInternal calling conventions.
AttrABIWrapper
// IsPcdata indicates this is a pcdata symbol.
AttrPcdata
// PkgInit indicates this is a compiler-generated package init func.
AttrPkgInit
// Linkname indicates this is a go:linkname'd symbol.
AttrLinkname
)
func (*Attribute) ABI ¶
func (a *Attribute) ABI() ABI
func (*Attribute) ABIWrapper ¶
func (a *Attribute) ABIWrapper() bool
func (*Attribute) CFunc ¶
func (a *Attribute) CFunc() bool
func (*Attribute) ContentAddressable ¶
func (a *Attribute) ContentAddressable() bool
func (*Attribute) DuplicateOK ¶
func (a *Attribute) DuplicateOK() bool
func (*Attribute) Indexed ¶
func (a *Attribute) Indexed() bool
func (*Attribute) IsLinkname ¶
func (a *Attribute) IsLinkname() bool
func (*Attribute) IsPcdata ¶
func (a *Attribute) IsPcdata() bool
func (*Attribute) IsPkgInit ¶
func (a *Attribute) IsPkgInit() bool
func (*Attribute) Leaf ¶
func (a *Attribute) Leaf() bool
func (*Attribute) Local ¶
func (a *Attribute) Local() bool
func (*Attribute) MakeTypelink ¶
func (a *Attribute) MakeTypelink() bool
func (*Attribute) NeedCtxt ¶
func (a *Attribute) NeedCtxt() bool
func (*Attribute) NoFrame ¶
func (a *Attribute) NoFrame() bool
func (*Attribute) NoSplit ¶
func (a *Attribute) NoSplit() bool
func (*Attribute) OnList ¶
func (a *Attribute) OnList() bool
func (*Attribute) ReflectMethod ¶
func (a *Attribute) ReflectMethod() bool
func (*Attribute) Set ¶
func (a *Attribute) Set(flag Attribute, value bool)
func (*Attribute) SetABI ¶
func (a *Attribute) SetABI(abi ABI)
func (*Attribute) Static ¶
func (a *Attribute) Static() bool
func (Attribute) String ¶
func (a Attribute) String() string
String formats a for printing in as part of a TEXT prog.
func (*Attribute) UsedInIface ¶
func (a *Attribute) UsedInIface() bool
func (*Attribute) WasInlined ¶
func (a *Attribute) WasInlined() bool
func (*Attribute) Wrapper ¶
func (a *Attribute) Wrapper() bool
type Auto ¶
type Auto struct {
Asym *LSym
Aoffset int32
Name AddrName
Gotype *LSym
}
type BySymName ¶
type BySymName []*LSym
func (BySymName) Len ¶
func (s BySymName) Len() int
func (BySymName) Less ¶
func (s BySymName) Less(i, j int) bool
func (BySymName) Swap ¶
func (s BySymName) Swap(i, j int)
type DwarfFixupTable ¶
This table is designed to aid in the creation of references between DWARF subprogram DIEs.
In most cases when one DWARF DIE has to refer to another DWARF DIE, the target of the reference has an LSym, which makes it easy to use the existing relocation mechanism. For DWARF inlined routine DIEs, however, the subprogram DIE has to refer to a child parameter/variable DIE of the abstract subprogram. This child DIE doesn't have an LSym, and also of interest is the fact that when DWARF generation is happening for inlined function F within caller G, it's possible that DWARF generation hasn't happened yet for F, so there is no way to know the offset of a child DIE within F's abstract function. Making matters more complex, each inlined instance of F may refer to a subset of the original F's variables (depending on what happens with optimization, some vars may be eliminated).
The fixup table below helps overcome this hurdle. At the point where a parameter/variable reference is made (via a call to "ReferenceChildDIE"), a fixup record is generate that records the relocation that is targeting that child variable. At a later point when the abstract function DIE is emitted, there will be a call to "RegisterChildDIEOffsets", at which point the offsets needed to apply fixups are captured. Finally, once the parallel portion of the compilation is done, fixups can actually be applied during the "Finalize" method (this can't be done during the parallel portion of the compile due to the possibility of data races).
This table is also used to record the "precursor" function node for each function that is the target of an inline -- child DIE references have to be made with respect to the original pre-optimization version of the function (to allow for the fact that each inlined body may be optimized differently).
type DwarfFixupTable struct {
// contains filtered or unexported fields
}
func NewDwarfFixupTable ¶
func NewDwarfFixupTable(ctxt *Link) *DwarfFixupTable
func (*DwarfFixupTable) AbsFuncDwarfSym ¶
func (ft *DwarfFixupTable) AbsFuncDwarfSym(fnsym *LSym) *LSym
return the LSym corresponding to the 'abstract subprogram' DWARF info entry for a function.
func (*DwarfFixupTable) Finalize ¶
func (ft *DwarfFixupTable) Finalize(myimportpath string, trace bool)
Called after all functions have been compiled; the main job of this function is to identify cases where there are outstanding fixups. This scenario crops up when we have references to variables of an inlined routine, but that routine is defined in some other package. This helper walks through and locate these fixups, then invokes a helper to create an abstract subprogram DIE for each one.
func (*DwarfFixupTable) GetPrecursorFunc ¶
func (ft *DwarfFixupTable) GetPrecursorFunc(s *LSym) Func
func (*DwarfFixupTable) ReferenceChildDIE ¶
func (ft *DwarfFixupTable) ReferenceChildDIE(s *LSym, ridx int, tgt *LSym, dclidx int, inlIndex int)
Make a note of a child DIE reference: relocation 'ridx' within symbol 's' is targeting child 'c' of DIE with symbol 'tgt'.
func (*DwarfFixupTable) RegisterChildDIEOffsets ¶
func (ft *DwarfFixupTable) RegisterChildDIEOffsets(s *LSym, vars []*dwarf.Var, coffsets []int32)
Called once DWARF generation is complete for a given abstract function, whose children might have been referenced via a call above. Stores the offsets for any child DIEs (vars, params) so that they can be consumed later in on DwarfFixupTable.Finalize, which applies any outstanding fixups.
func (*DwarfFixupTable) SetPrecursorFunc ¶
func (ft *DwarfFixupTable) SetPrecursorFunc(s *LSym, fn Func)
type FileInfo ¶
A FileInfo contains extra fields for SDATA symbols backed by files. (If LSym.Extra is a *FileInfo, LSym.P == nil.)
type FileInfo struct {
Name string // name of file to read into object file
Size int64 // length of file
}
type Func ¶
A Func represents a Go function. If non-nil, it must be a *ir.Func.
type Func interface {
Pos() src.XPos
}
type FuncInfo ¶
A FuncInfo contains extra fields for STEXT symbols.
type FuncInfo struct {
Args int32
Locals int32
Align int32
FuncID abi.FuncID
FuncFlag abi.FuncFlag
StartLine int32
Text *Prog
Autot map[*LSym]struct{}
Pcln Pcln
InlMarks []InlMark
GCArgs *LSym
GCLocals *LSym
StackObjects *LSym
OpenCodedDeferInfo *LSym
ArgInfo *LSym // argument info for traceback
ArgLiveInfo *LSym // argument liveness info for traceback
WrapInfo *LSym // for wrapper, info of wrapped function
JumpTables []JumpTable
FuncInfoSym *LSym
WasmImportSym *LSym
WasmImport *WasmImport
// contains filtered or unexported fields
}
func (*FuncInfo) AddInlMark ¶
func (fi *FuncInfo) AddInlMark(p *Prog, id int32)
Mark p as the instruction to set as the pc when "unwinding" the inlining global frame id. Usually it should be instruction with a file:line at the callsite, and occur just before the body of the inlined function.
func (*FuncInfo) AddSpill ¶
func (fi *FuncInfo) AddSpill(s RegSpill)
AddSpill appends a spill record to the list for FuncInfo fi
func (*FuncInfo) RecordAutoType ¶
func (fi *FuncInfo) RecordAutoType(gotype *LSym)
Record the type symbol for an auto variable so that the linker an emit DWARF type information for the type.
func (*FuncInfo) SpillRegisterArgs ¶
func (fi *FuncInfo) SpillRegisterArgs(last *Prog, pa ProgAlloc) *Prog
SpillRegisterArgs emits the code to spill register args into whatever locations the spill records specify.
func (*FuncInfo) UnspillRegisterArgs ¶
func (fi *FuncInfo) UnspillRegisterArgs(last *Prog, pa ProgAlloc) *Prog
UnspillRegisterArgs emits the code to restore register args from whatever locations the spill records specify.
type InlMark ¶
type InlMark struct {
// contains filtered or unexported fields
}
type InlTree ¶
InlTree is a collection of inlined calls. The Parent field of an InlinedCall is the index of another InlinedCall in InlTree.
The compiler maintains a global inlining tree and adds a node to it every time a function is inlined. For example, suppose f() calls g() and g has two calls to h(), and that f, g, and h are inlineable:
1 func main() {
2 f()
3 }
4 func f() {
5 g()
6 }
7 func g() {
8 h()
9 h()
10 }
11 func h() {
12 println("H")
13 }
Assuming the global tree starts empty, inlining will produce the following tree:
[]InlinedCall{
{Parent: -1, Func: "f", Pos: <line 2>},
{Parent: 0, Func: "g", Pos: <line 5>},
{Parent: 1, Func: "h", Pos: <line 8>},
{Parent: 1, Func: "h", Pos: <line 9>},
}
The nodes of h inlined into main will have inlining indexes 2 and 3.
Eventually, the compiler extracts a per-function inlining tree from the global inlining tree (see pcln.go).
type InlTree struct {
// contains filtered or unexported fields
}
func (*InlTree) Add ¶
func (tree *InlTree) Add(parent int, pos src.XPos, func_ *LSym, name string) int
Add adds a new call to the tree, returning its index.
func (*InlTree) AllParents ¶
func (tree *InlTree) AllParents(inlIndex int, do func(InlinedCall))
AllParents invokes do on each InlinedCall in the inlining call stack, from outermost to innermost.
That is, if inlIndex corresponds to f inlining g inlining h, AllParents invokes do with the call for inlining g into f, and then inlining h into g.
func (*InlTree) CallPos ¶
func (tree *InlTree) CallPos(inlIndex int) src.XPos
func (*InlTree) InlinedFunction ¶
func (tree *InlTree) InlinedFunction(inlIndex int) *LSym
func (*InlTree) Parent ¶
func (tree *InlTree) Parent(inlIndex int) int
type InlinedCall ¶
InlinedCall is a node in an InlTree.
type InlinedCall struct {
Parent int // index of the parent in the InlTree or < 0 if outermost call
Pos src.XPos // position of the inlined call
Func *LSym // function that was inlined
Name string // bare name of the function (w/o package prefix)
ParentPC int32 // PC of instruction just before inlined body. Only valid in local trees.
}
type JumpTable ¶
JumpTable represents a table used for implementing multi-way computed branching, used typically for implementing switches. Sym is the table itself, and Targets is a list of target instructions to go to for the computed branch index.
type JumpTable struct {
Sym *LSym
Targets []*Prog
}
type LSym ¶
An LSym is the sort of symbol that is written to an object file. It represents Go symbols in a flat pkg+"."+name namespace.
type LSym struct {
Name string
Type objabi.SymKind
Attribute
Size int64
Gotype *LSym
P []byte
R []Reloc
Extra *interface{} // *FuncInfo, *VarInfo, *FileInfo, or *TypeInfo, if present
Pkg string
PkgIdx int32
SymIdx int32
}
func (*LSym) CanBeAnSSAAux ¶
func (*LSym) CanBeAnSSAAux()
func (*LSym) CanBeAnSSASym ¶
func (*LSym) CanBeAnSSASym()
The compiler needs *LSym to be assignable to cmd/compile/internal/ssa.Sym.
func (*LSym) File ¶
func (s *LSym) File() *FileInfo
File returns the *FileInfo associated with s, or else nil.
func (*LSym) Func ¶
func (s *LSym) Func() *FuncInfo
Func returns the *FuncInfo associated with s, or else nil.
func (*LSym) Grow ¶
func (s *LSym) Grow(lsiz int64)
Grow increases the length of s.P to lsiz.
func (*LSym) GrowCap ¶
func (s *LSym) GrowCap(c int64)
GrowCap increases the capacity of s.P to c.
func (*LSym) NewFileInfo ¶
func (s *LSym) NewFileInfo() *FileInfo
NewFileInfo allocates and returns a FileInfo for LSym.
func (*LSym) NewFuncInfo ¶
func (s *LSym) NewFuncInfo() *FuncInfo
NewFuncInfo allocates and returns a FuncInfo for LSym.
func (*LSym) NewTypeInfo ¶
func (s *LSym) NewTypeInfo() *TypeInfo
func (*LSym) NewVarInfo ¶
func (s *LSym) NewVarInfo() *VarInfo
NewVarInfo allocates and returns a VarInfo for LSym.
func (*LSym) String ¶
func (s *LSym) String() string
func (*LSym) TextAttrString ¶
func (s *LSym) TextAttrString() string
TextAttrString formats the symbol attributes for printing in as part of a TEXT prog.
func (*LSym) VarInfo ¶
func (s *LSym) VarInfo() *VarInfo
VarInfo returns the *VarInfo associated with s, or else nil.
func (*LSym) WriteAddr ¶
func (s *LSym) WriteAddr(ctxt *Link, off int64, siz int, rsym *LSym, roff int64)
WriteAddr writes an address of size siz into s at offset off. rsym and roff specify the relocation for the address.
func (*LSym) WriteBytes ¶
func (s *LSym) WriteBytes(ctxt *Link, off int64, b []byte) int64
WriteBytes writes a slice of bytes into s at offset off.
func (*LSym) WriteCURelativeAddr ¶
func (s *LSym) WriteCURelativeAddr(ctxt *Link, off int64, rsym *LSym, roff int64)
WriteCURelativeAddr writes a pointer-sized address into s at offset off. rsym and roff specify the relocation for the address which will be resolved by the linker to an offset from the DW_AT_low_pc attribute of the DWARF Compile Unit of rsym.
func (*LSym) WriteFloat32 ¶
func (s *LSym) WriteFloat32(ctxt *Link, off int64, f float32)
WriteFloat32 writes f into s at offset off.
func (*LSym) WriteFloat64 ¶
func (s *LSym) WriteFloat64(ctxt *Link, off int64, f float64)
WriteFloat64 writes f into s at offset off.
func (*LSym) WriteInt ¶
func (s *LSym) WriteInt(ctxt *Link, off int64, siz int, i int64)
WriteInt writes an integer i of size siz into s at offset off.
func (*LSym) WriteOff ¶
func (s *LSym) WriteOff(ctxt *Link, off int64, rsym *LSym, roff int64)
WriteOff writes a 4 byte offset to rsym+roff into s at offset off. After linking the 4 bytes stored at s+off will be rsym+roff-(start of section that s is in).
func (*LSym) WriteString ¶
func (s *LSym) WriteString(ctxt *Link, off int64, siz int, str string)
WriteString writes a string of size siz into s at offset off.
func (*LSym) WriteWeakAddr ¶
func (s *LSym) WriteWeakAddr(ctxt *Link, off int64, siz int, rsym *LSym, roff int64)
WriteWeakAddr writes an address of size siz into s at offset off. rsym and roff specify the relocation for the address. This is a weak reference.
func (*LSym) WriteWeakOff ¶
func (s *LSym) WriteWeakOff(ctxt *Link, off int64, rsym *LSym, roff int64)
WriteWeakOff writes a weak 4 byte offset to rsym+roff into s at offset off. After linking the 4 bytes stored at s+off will be rsym+roff-(start of section that s is in).
type Link ¶
Link holds the context for writing object code from a compiler to be linker input or for reading that input into the linker.
type Link struct {
Headtype objabi.HeadType
Arch *LinkArch
Debugasm int
Debugvlog bool
Debugpcln string
Flag_shared bool
Flag_dynlink bool
Flag_linkshared bool
Flag_optimize bool
Flag_locationlists bool
Flag_noRefName bool // do not include referenced symbol names in object file
Retpoline bool // emit use of retpoline stubs for indirect jmp/call
Flag_maymorestack string // If not "", call this function before stack checks
Bso *bufio.Writer
Pathname string
Pkgpath string // the current package's import path
PosTable src.PosTable
InlTree InlTree // global inlining tree used by gc/inl.go
DwFixups *DwarfFixupTable
Imports []goobj.ImportedPkg
DiagFunc func(string, ...interface{})
DiagFlush func()
DebugInfo func(fn *LSym, info *LSym, curfn Func) ([]dwarf.Scope, dwarf.InlCalls)
GenAbstractFunc func(fn *LSym)
Errors int
InParallel bool // parallel backend phase in effect
UseBASEntries bool // use Base Address Selection Entries in location lists and PC ranges
IsAsm bool // is the source assembly language, which may contain surprising idioms (e.g., call tables)
Std bool // is standard library package
// state for writing objects
Text []*LSym
Data []*LSym
// Windows SEH symbols are also data symbols that can be created
// concurrently.
SEHSyms []*LSym
Fingerprint goobj.FingerprintType // fingerprint of symbol indices, to catch index mismatch
// contains filtered or unexported fields
}
func Linknew ¶
func Linknew(arch *LinkArch) *Link
func (*Link) AddImport ¶
func (ctxt *Link) AddImport(pkg string, fingerprint goobj.FingerprintType)
AddImport adds a package to the list of imported packages.
func (*Link) AllPos ¶
func (ctxt *Link) AllPos(xpos src.XPos, do func(src.Pos))
AllPos invokes do with every position in the inlining call stack for xpos, from outermost to innermost. That is, xpos corresponds to f inlining g inlining h, AllPos invokes do with the position in f, then the position in g, then the position in h.
func (*Link) CanReuseProgs ¶
func (ctxt *Link) CanReuseProgs() bool
func (*Link) Diag ¶
func (ctxt *Link) Diag(format string, args ...interface{})
func (*Link) DwarfAbstractFunc ¶
func (ctxt *Link) DwarfAbstractFunc(curfn Func, s *LSym)
func (*Link) DwarfGlobal ¶
func (ctxt *Link) DwarfGlobal(typename string, varSym *LSym)
DwarfGlobal creates a link symbol containing a DWARF entry for a global variable.
func (*Link) DwarfIntConst ¶
func (ctxt *Link) DwarfIntConst(name, typename string, val int64)
DwarfIntConst creates a link symbol for an integer constant with the given name, type and value.
func (*Link) EmitEntryLiveness ¶
func (ctxt *Link) EmitEntryLiveness(s *LSym, p *Prog, newprog ProgAlloc) *Prog
EmitEntryLiveness generates PCDATA Progs after p to switch to the liveness map active at the entry of function s. It returns the last Prog generated.
func (*Link) EmitEntryStackMap ¶
func (ctxt *Link) EmitEntryStackMap(s *LSym, p *Prog, newprog ProgAlloc) *Prog
Similar to EmitEntryLiveness, but just emit stack map.
func (*Link) EmitEntryUnsafePoint ¶
func (ctxt *Link) EmitEntryUnsafePoint(s *LSym, p *Prog, newprog ProgAlloc) *Prog
Similar to EmitEntryLiveness, but just emit unsafe point map.
func (*Link) EndUnsafePoint ¶
func (ctxt *Link) EndUnsafePoint(p *Prog, newprog ProgAlloc, oldval int64) *Prog
EndUnsafePoint generates PCDATA Progs after p to mark the end of an unsafe point, restoring the register map index to oldval. The unsafe point ends right after p. It returns the last Prog generated.
func (*Link) Float32Sym ¶
func (ctxt *Link) Float32Sym(f float32) *LSym
func (*Link) Float64Sym ¶
func (ctxt *Link) Float64Sym(f float64) *LSym
func (*Link) GCLocalsSym ¶
func (ctxt *Link) GCLocalsSym(data []byte) *LSym
GCLocalsSym generates a content-addressable sym containing data.
func (*Link) Globl ¶
func (ctxt *Link) Globl(s *LSym, size int64, flag int)
func (*Link) GloblPos ¶
func (ctxt *Link) GloblPos(s *LSym, size int64, flag int, pos src.XPos)
func (*Link) InitTextSym ¶
func (ctxt *Link) InitTextSym(s *LSym, flag int, start src.XPos)
func (*Link) InnermostPos ¶
func (ctxt *Link) InnermostPos(xpos src.XPos) src.Pos
InnermostPos returns the innermost position corresponding to xpos, that is, the code that is inlined and that inlines nothing else. In the example for InlTree above, the code for println within h would have an innermost position with line number 12, whether h was not inlined, inlined into g, g-then-f, or g-then-f-then-main. This corresponds to what someone debugging main, f, g, or h might expect to see while single-stepping.
func (*Link) Int128Sym ¶
func (ctxt *Link) Int128Sym(hi, lo int64) *LSym
func (*Link) Int32Sym ¶
func (ctxt *Link) Int32Sym(i int64) *LSym
func (*Link) Int64Sym ¶
func (ctxt *Link) Int64Sym(i int64) *LSym
func (*Link) Logf ¶
func (ctxt *Link) Logf(format string, args ...interface{})
func (*Link) Lookup ¶
func (ctxt *Link) Lookup(name string) *LSym
Lookup looks up the symbol with name name. If it does not exist, it creates it.
func (*Link) LookupABI ¶
func (ctxt *Link) LookupABI(name string, abi ABI) *LSym
LookupABI looks up a symbol with the given ABI. If it does not exist, it creates it.
func (*Link) LookupABIInit ¶
func (ctxt *Link) LookupABIInit(name string, abi ABI, init func(s *LSym)) *LSym
LookupABIInit looks up a symbol with the given ABI. If it does not exist, it creates it and passes it to init for one-time initialization.
func (*Link) LookupDerived ¶
func (ctxt *Link) LookupDerived(s *LSym, name string) *LSym
LookupDerived looks up or creates the symbol with name derived from symbol s. The resulting symbol will be static iff s is.
func (*Link) LookupInit ¶
func (ctxt *Link) LookupInit(name string, init func(s *LSym)) *LSym
LookupInit looks up the symbol with name name. If it does not exist, it creates it and passes it to init for one-time initialization.
func (*Link) LookupStatic ¶
func (ctxt *Link) LookupStatic(name string) *LSym
LookupStatic looks up the static symbol with name name. If it does not exist, it creates it.
func (*Link) NewProg ¶
func (ctxt *Link) NewProg() *Prog
func (*Link) NumberSyms ¶
func (ctxt *Link) NumberSyms()
Assign index to symbols. asm is set to true if this is called by the assembler (i.e. not the compiler), in which case all the symbols are non-package (for now).
func (*Link) OutermostPos ¶
func (ctxt *Link) OutermostPos(xpos src.XPos) src.Pos
OutermostPos returns the outermost position corresponding to xpos, which is where xpos was ultimately inlined to. In the example for InlTree, main() contains inlined AST nodes from h(), but the outermost position for those nodes is line 2.
func (*Link) StartUnsafePoint ¶
func (ctxt *Link) StartUnsafePoint(p *Prog, newprog ProgAlloc) *Prog
StartUnsafePoint generates PCDATA Progs after p to mark the beginning of an unsafe point. The unsafe point starts immediately after p. It returns the last Prog generated.
type LinkArch ¶
LinkArch is the definition of a single architecture.
type LinkArch struct {
*sys.Arch
Init func(*Link)
ErrorCheck func(*Link, *LSym)
Preprocess func(*Link, *LSym, ProgAlloc)
Assemble func(*Link, *LSym, ProgAlloc)
Progedit func(*Link, *Prog, ProgAlloc)
SEH func(*Link, *LSym) *LSym
UnaryDst map[As]bool // Instruction takes one operand, a destination.
DWARFRegisters map[int16]int16
}
type OperandPos ¶
type OperandPos int8
const (
Source OperandPos = iota
Destination
)
type PCIter ¶
PCIter iterates over encoded pcdata tables.
type PCIter struct {
PC uint32
NextPC uint32
PCScale uint32
Value int32
Done bool
// contains filtered or unexported fields
}
func NewPCIter ¶
func NewPCIter(pcScale uint32) *PCIter
NewPCIter creates a PCIter with a scale factor for the PC step size.
func (*PCIter) Init ¶
func (it *PCIter) Init(p []byte)
init prepares it to iterate over p, and advances it to the first pc.
func (*PCIter) Next ¶
func (it *PCIter) Next()
Next advances it to the Next pc.
type Pcln ¶
type Pcln struct {
// Aux symbols for pcln
Pcsp *LSym
Pcfile *LSym
Pcline *LSym
Pcinline *LSym
Pcdata []*LSym
Funcdata []*LSym
UsedFiles map[goobj.CUFileIndex]struct{} // file indices used while generating pcfile
InlTree InlTree // per-function inlining tree extracted from the global tree
}
type Plist ¶
type Plist struct {
Firstpc *Prog
Curfn Func
}
type Prog ¶
Prog describes a single machine instruction.
The general instruction form is:
(1) As.Scond From [, ...RestArgs], To (2) As.Scond From, Reg [, ...RestArgs], To, RegTo2
where As is an opcode and the others are arguments: From, Reg are sources, and To, RegTo2 are destinations. RestArgs can hold additional sources and destinations. Usually, not all arguments are present. For example, MOVL R1, R2 encodes using only As=MOVL, From=R1, To=R2. The Scond field holds additional condition bits for systems (like arm) that have generalized conditional execution. (2) form is present for compatibility with older code, to avoid too much changes in a single swing. (1) scheme is enough to express any kind of operand combination.
Jump instructions use the To.Val field to point to the target *Prog, which must be in the same linked list as the jump instruction.
The Progs for a given function are arranged in a list linked through the Link field.
Each Prog is charged to a specific source line in the debug information, specified by Pos.Line(). Every Prog has a Ctxt field that defines its context. For performance reasons, Progs are usually bulk allocated, cached, and reused; those bulk allocators should always be used, rather than new(Prog).
The other fields not yet mentioned are for use by the back ends and should be left zeroed by creators of Prog lists.
type Prog struct {
Ctxt *Link // linker context
Link *Prog // next Prog in linked list
From Addr // first source operand
RestArgs []AddrPos // can pack any operands that not fit into {Prog.From, Prog.To}, same kinds of operands are saved in order
To Addr // destination operand (second is RegTo2 below)
Pool *Prog // constant pool entry, for arm,arm64 back ends
Forwd *Prog // for x86 back end
Rel *Prog // for x86, arm back ends
Pc int64 // for back ends or assembler: virtual or actual program counter, depending on phase
Pos src.XPos // source position of this instruction
Spadj int32 // effect of instruction on stack pointer (increment or decrement amount)
As As // assembler opcode
Reg int16 // 2nd source operand
RegTo2 int16 // 2nd destination operand
Mark uint16 // bitmask of arch-specific items
Optab uint16 // arch-specific opcode index
Scond uint8 // bits that describe instruction suffixes (e.g. ARM conditions, RISCV Rounding Mode)
Back uint8 // for x86 back end: backwards branch state
Ft uint8 // for x86 back end: type index of Prog.From
Tt uint8 // for x86 back end: type index of Prog.To
Isize uint8 // for x86 back end: size of the instruction in bytes
}
func Appendp ¶
func Appendp(q *Prog, newprog ProgAlloc) *Prog
func (*Prog) AddRestDest ¶
func (p *Prog) AddRestDest(a Addr)
AddRestDest assigns []Args{{a, Destination}} to p.RestArgs when the second destination operand does not fit into prog.RegTo2.
func (*Prog) AddRestSource ¶
func (p *Prog) AddRestSource(a Addr)
AddRestSource assigns []Args{{a, Source}} to p.RestArgs.
func (*Prog) AddRestSourceArgs ¶
func (p *Prog) AddRestSourceArgs(args []Addr)
AddRestSourceArgs assigns more than one source operands to p.RestArgs.
func (*Prog) AddRestSourceConst ¶
func (p *Prog) AddRestSourceConst(off int64)
AddRestSourceConst calls p.AddRestSource with a const Addr containing off.
func (*Prog) AddRestSourceReg ¶
func (p *Prog) AddRestSourceReg(reg int16)
AddRestSourceReg calls p.AddRestSource with a register Addr containing reg.
func (*Prog) From3Type ¶
func (p *Prog) From3Type() AddrType
From3Type returns p.GetFrom3().Type, or TYPE_NONE when p.GetFrom3() returns nil.
func (*Prog) GetFrom3 ¶
func (p *Prog) GetFrom3() *Addr
GetFrom3 returns second source operand (the first is Prog.From). The same kinds of operands are saved in order so GetFrom3 actually return the first source operand in p.RestArgs. In combination with Prog.From and Prog.To it makes common 3 operand case easier to use.
func (*Prog) GetTo2 ¶
func (p *Prog) GetTo2() *Addr
GetTo2 returns the second destination operand. The same kinds of operands are saved in order so GetTo2 actually return the first destination operand in Prog.RestArgs[]
func (*Prog) InnermostFilename ¶
func (p *Prog) InnermostFilename() string
InnermostFilename returns a string containing the innermost (in inlining) filename at p's position
func (*Prog) InnermostLine ¶
func (p *Prog) InnermostLine(w io.Writer)
func (*Prog) InnermostLineNumber ¶
func (p *Prog) InnermostLineNumber() string
InnermostLineNumber returns a string containing the line number for the innermost inlined function (if any inlining) at p's position
func (*Prog) InnermostLineNumberHTML ¶
func (p *Prog) InnermostLineNumberHTML() string
InnermostLineNumberHTML returns a string containing the line number for the innermost inlined function (if any inlining) at p's position
func (*Prog) InnermostString ¶
func (p *Prog) InnermostString(w io.Writer)
func (*Prog) InstructionString ¶
func (p *Prog) InstructionString() string
InstructionString returns a string representation of the instruction without preceding program counter or file and line number.
func (*Prog) Line ¶
func (p *Prog) Line() string
Line returns a string containing the filename and line number for p
func (*Prog) String ¶
func (p *Prog) String() string
func (*Prog) WriteInstructionString ¶
func (p *Prog) WriteInstructionString(w io.Writer)
WriteInstructionString writes a string representation of the instruction without preceding program counter or file and line number.
type ProgAlloc ¶
ProgAlloc is a function that allocates Progs. It is used to provide access to cached/bulk-allocated Progs to the assemblers.
type ProgAlloc func() *Prog
type RegSpill ¶
RegSpill provides spill/fill information for a register-resident argument to a function. These need spilling/filling in the safepoint/stackgrowth case. At the time of fill/spill, the offset must be adjusted by the architecture-dependent adjustment to hardware SP that occurs in a call instruction. E.g., for AMD64, at Offset+8 because the return address was pushed.
type RegSpill struct {
Addr Addr
Reg int16
Spill, Unspill As
}
type Reloc ¶
type Reloc struct {
Off int32
Siz uint8
Type objabi.RelocType
Add int64
Sym *LSym
}
func Addrel ¶
func Addrel(s *LSym) *Reloc
type TypeInfo ¶
A TypeInfo contains information for a symbol that contains a runtime._type.
type TypeInfo struct {
Type interface{} // a *cmd/compile/internal/types.Type
}
type VarInfo ¶
type VarInfo struct {
// contains filtered or unexported fields
}
type WasmField ¶
type WasmField struct {
Type WasmFieldType
// Offset holds the frame-pointer-relative locations for Go's stack-based
// ABI. This is used by the src/cmd/internal/wasm package to map WASM
// import parameters to the Go stack in a wrapper function.
Offset int64
}
type WasmFieldType ¶
type WasmFieldType byte
const (
WasmI32 WasmFieldType = iota
WasmI64
WasmF32
WasmF64
WasmPtr
)
type WasmImport ¶
WasmImport represents a WebAssembly (WASM) imported function with parameters and results translated into WASM types based on the Go function declaration.
type WasmImport struct {
// Module holds the WASM module name specified by the //go:wasmimport
// directive.
Module string
// Name holds the WASM imported function name specified by the
// //go:wasmimport directive.
Name string
// Params holds the imported function parameter fields.
Params []WasmField
// Results holds the imported function result fields.
Results []WasmField
}
func (*WasmImport) CreateSym ¶
func (wi *WasmImport) CreateSym(ctxt *Link) *LSym