tcpsock.go

     1  // Copyright 2009 The Go Authors. All rights reserved.
     2  // Use of this source code is governed by a BSD-style
     3  // license that can be found in the LICENSE file.
     4  
     5  package net
     6  
     7  import (
     8  	"context"
     9  	"internal/itoa"
    10  	"io"
    11  	"net/netip"
    12  	"os"
    13  	"syscall"
    14  	"time"
    15  )
    16  
    17  // BUG(mikio): On JS and Windows, the File method of TCPConn and
    18  // TCPListener is not implemented.
    19  
    20  // TCPAddr represents the address of a TCP end point.
    21  type TCPAddr struct {
    22  	IP   IP
    23  	Port int
    24  	Zone string // IPv6 scoped addressing zone
    25  }
    26  
    27  // AddrPort returns the [TCPAddr] a as a [netip.AddrPort].
    28  //
    29  // If a.Port does not fit in a uint16, it's silently truncated.
    30  //
    31  // If a is nil, a zero value is returned.
    32  func (a *TCPAddr) AddrPort() netip.AddrPort {
    33  	if a == nil {
    34  		return netip.AddrPort{}
    35  	}
    36  	na, _ := netip.AddrFromSlice(a.IP)
    37  	na = na.WithZone(a.Zone)
    38  	return netip.AddrPortFrom(na, uint16(a.Port))
    39  }
    40  
    41  // Network returns the address's network name, "tcp".
    42  func (a *TCPAddr) Network() string { return "tcp" }
    43  
    44  func (a *TCPAddr) String() string {
    45  	if a == nil {
    46  		return "<nil>"
    47  	}
    48  	ip := ipEmptyString(a.IP)
    49  	if a.Zone != "" {
    50  		return JoinHostPort(ip+"%"+a.Zone, itoa.Itoa(a.Port))
    51  	}
    52  	return JoinHostPort(ip, itoa.Itoa(a.Port))
    53  }
    54  
    55  func (a *TCPAddr) isWildcard() bool {
    56  	if a == nil || a.IP == nil {
    57  		return true
    58  	}
    59  	return a.IP.IsUnspecified()
    60  }
    61  
    62  func (a *TCPAddr) opAddr() Addr {
    63  	if a == nil {
    64  		return nil
    65  	}
    66  	return a
    67  }
    68  
    69  // ResolveTCPAddr returns an address of TCP end point.
    70  //
    71  // The network must be a TCP network name.
    72  //
    73  // If the host in the address parameter is not a literal IP address or
    74  // the port is not a literal port number, ResolveTCPAddr resolves the
    75  // address to an address of TCP end point.
    76  // Otherwise, it parses the address as a pair of literal IP address
    77  // and port number.
    78  // The address parameter can use a host name, but this is not
    79  // recommended, because it will return at most one of the host name's
    80  // IP addresses.
    81  //
    82  // See func [Dial] for a description of the network and address
    83  // parameters.
    84  func ResolveTCPAddr(network, address string) (*TCPAddr, error) {
    85  	switch network {
    86  	case "tcp", "tcp4", "tcp6":
    87  	case "": // a hint wildcard for Go 1.0 undocumented behavior
    88  		network = "tcp"
    89  	default:
    90  		return nil, UnknownNetworkError(network)
    91  	}
    92  	addrs, err := DefaultResolver.internetAddrList(context.Background(), network, address)
    93  	if err != nil {
    94  		return nil, err
    95  	}
    96  	return addrs.forResolve(network, address).(*TCPAddr), nil
    97  }
    98  
    99  // TCPAddrFromAddrPort returns addr as a [TCPAddr]. If addr.IsValid() is false,
   100  // then the returned TCPAddr will contain a nil IP field, indicating an
   101  // address family-agnostic unspecified address.
   102  func TCPAddrFromAddrPort(addr netip.AddrPort) *TCPAddr {
   103  	return &TCPAddr{
   104  		IP:   addr.Addr().AsSlice(),
   105  		Zone: addr.Addr().Zone(),
   106  		Port: int(addr.Port()),
   107  	}
   108  }
   109  
   110  // TCPConn is an implementation of the [Conn] interface for TCP network
   111  // connections.
   112  type TCPConn struct {
   113  	conn
   114  }
   115  
   116  // KeepAliveConfig contains TCP keep-alive options.
   117  //
   118  // If the Idle, Interval, or Count fields are zero, a default value is chosen.
   119  // If a field is negative, the corresponding socket-level option will be left unchanged.
   120  //
   121  // Note that prior to Windows 10 version 1709, neither setting Idle and Interval
   122  // separately nor changing Count (which is usually 10) is supported.
   123  // Therefore, it's recommended to set both Idle and Interval to non-negative values
   124  // in conjunction with a -1 for Count on those old Windows if you intend to customize
   125  // the TCP keep-alive settings.
   126  // By contrast, if only one of Idle and Interval is set to a non-negative value,
   127  // the other will be set to the system default value, and ultimately,
   128  // set both Idle and Interval to negative values if you want to leave them unchanged.
   129  //
   130  // Note that Solaris and its derivatives do not support setting Interval to a non-negative value
   131  // and Count to a negative value, or vice-versa.
   132  type KeepAliveConfig struct {
   133  	// If Enable is true, keep-alive probes are enabled.
   134  	Enable bool
   135  
   136  	// Idle is the time that the connection must be idle before
   137  	// the first keep-alive probe is sent.
   138  	// If zero, a default value of 15 seconds is used.
   139  	Idle time.Duration
   140  
   141  	// Interval is the time between keep-alive probes.
   142  	// If zero, a default value of 15 seconds is used.
   143  	Interval time.Duration
   144  
   145  	// Count is the maximum number of keep-alive probes that
   146  	// can go unanswered before dropping a connection.
   147  	// If zero, a default value of 9 is used.
   148  	Count int
   149  }
   150  
   151  // SyscallConn returns a raw network connection.
   152  // This implements the [syscall.Conn] interface.
   153  func (c *TCPConn) SyscallConn() (syscall.RawConn, error) {
   154  	if !c.ok() {
   155  		return nil, syscall.EINVAL
   156  	}
   157  	return newRawConn(c.fd), nil
   158  }
   159  
   160  // ReadFrom implements the [io.ReaderFrom] ReadFrom method.
   161  func (c *TCPConn) ReadFrom(r io.Reader) (int64, error) {
   162  	if !c.ok() {
   163  		return 0, syscall.EINVAL
   164  	}
   165  	n, err := c.readFrom(r)
   166  	if err != nil && err != io.EOF {
   167  		err = &OpError{Op: "readfrom", Net: c.fd.net, Source: c.fd.laddr, Addr: c.fd.raddr, Err: err}
   168  	}
   169  	return n, err
   170  }
   171  
   172  // WriteTo implements the io.WriterTo WriteTo method.
   173  func (c *TCPConn) WriteTo(w io.Writer) (int64, error) {
   174  	if !c.ok() {
   175  		return 0, syscall.EINVAL
   176  	}
   177  	n, err := c.writeTo(w)
   178  	if err != nil && err != io.EOF {
   179  		err = &OpError{Op: "writeto", Net: c.fd.net, Source: c.fd.laddr, Addr: c.fd.raddr, Err: err}
   180  	}
   181  	return n, err
   182  }
   183  
   184  // CloseRead shuts down the reading side of the TCP connection.
   185  // Most callers should just use Close.
   186  func (c *TCPConn) CloseRead() error {
   187  	if !c.ok() {
   188  		return syscall.EINVAL
   189  	}
   190  	if err := c.fd.closeRead(); err != nil {
   191  		return &OpError{Op: "close", Net: c.fd.net, Source: c.fd.laddr, Addr: c.fd.raddr, Err: err}
   192  	}
   193  	return nil
   194  }
   195  
   196  // CloseWrite shuts down the writing side of the TCP connection.
   197  // Most callers should just use Close.
   198  func (c *TCPConn) CloseWrite() error {
   199  	if !c.ok() {
   200  		return syscall.EINVAL
   201  	}
   202  	if err := c.fd.closeWrite(); err != nil {
   203  		return &OpError{Op: "close", Net: c.fd.net, Source: c.fd.laddr, Addr: c.fd.raddr, Err: err}
   204  	}
   205  	return nil
   206  }
   207  
   208  // SetLinger sets the behavior of Close on a connection which still
   209  // has data waiting to be sent or to be acknowledged.
   210  //
   211  // If sec < 0 (the default), the operating system finishes sending the
   212  // data in the background.
   213  //
   214  // If sec == 0, the operating system discards any unsent or
   215  // unacknowledged data.
   216  //
   217  // If sec > 0, the data is sent in the background as with sec < 0.
   218  // On some operating systems including Linux, this may cause Close to block
   219  // until all data has been sent or discarded.
   220  // On some operating systems after sec seconds have elapsed any remaining
   221  // unsent data may be discarded.
   222  func (c *TCPConn) SetLinger(sec int) error {
   223  	if !c.ok() {
   224  		return syscall.EINVAL
   225  	}
   226  	if err := setLinger(c.fd, sec); err != nil {
   227  		return &OpError{Op: "set", Net: c.fd.net, Source: c.fd.laddr, Addr: c.fd.raddr, Err: err}
   228  	}
   229  	return nil
   230  }
   231  
   232  // SetKeepAlive sets whether the operating system should send
   233  // keep-alive messages on the connection.
   234  func (c *TCPConn) SetKeepAlive(keepalive bool) error {
   235  	if !c.ok() {
   236  		return syscall.EINVAL
   237  	}
   238  	if err := setKeepAlive(c.fd, keepalive); err != nil {
   239  		return &OpError{Op: "set", Net: c.fd.net, Source: c.fd.laddr, Addr: c.fd.raddr, Err: err}
   240  	}
   241  	return nil
   242  }
   243  
   244  // SetKeepAlivePeriod sets the duration the connection needs to
   245  // remain idle before TCP starts sending keepalive probes.
   246  //
   247  // Note that calling this method on Windows prior to Windows 10 version 1709
   248  // will reset the KeepAliveInterval to the default system value, which is normally 1 second.
   249  func (c *TCPConn) SetKeepAlivePeriod(d time.Duration) error {
   250  	if !c.ok() {
   251  		return syscall.EINVAL
   252  	}
   253  	if err := setKeepAliveIdle(c.fd, d); err != nil {
   254  		return &OpError{Op: "set", Net: c.fd.net, Source: c.fd.laddr, Addr: c.fd.raddr, Err: err}
   255  	}
   256  	return nil
   257  }
   258  
   259  // SetNoDelay controls whether the operating system should delay
   260  // packet transmission in hopes of sending fewer packets (Nagle's
   261  // algorithm).  The default is true (no delay), meaning that data is
   262  // sent as soon as possible after a Write.
   263  func (c *TCPConn) SetNoDelay(noDelay bool) error {
   264  	if !c.ok() {
   265  		return syscall.EINVAL
   266  	}
   267  	if err := setNoDelay(c.fd, noDelay); err != nil {
   268  		return &OpError{Op: "set", Net: c.fd.net, Source: c.fd.laddr, Addr: c.fd.raddr, Err: err}
   269  	}
   270  	return nil
   271  }
   272  
   273  // MultipathTCP reports whether the ongoing connection is using MPTCP.
   274  //
   275  // If Multipath TCP is not supported by the host, by the other peer or
   276  // intentionally / accidentally filtered out by a device in between, a
   277  // fallback to TCP will be done. This method does its best to check if
   278  // MPTCP is still being used or not.
   279  //
   280  // On Linux, more conditions are verified on kernels >= v5.16, improving
   281  // the results.
   282  func (c *TCPConn) MultipathTCP() (bool, error) {
   283  	if !c.ok() {
   284  		return false, syscall.EINVAL
   285  	}
   286  	return isUsingMultipathTCP(c.fd), nil
   287  }
   288  
   289  func newTCPConn(fd *netFD, keepAliveIdle time.Duration, keepAliveCfg KeepAliveConfig, preKeepAliveHook func(*netFD), keepAliveHook func(KeepAliveConfig)) *TCPConn {
   290  	setNoDelay(fd, true)
   291  	if !keepAliveCfg.Enable && keepAliveIdle >= 0 {
   292  		keepAliveCfg = KeepAliveConfig{
   293  			Enable: true,
   294  			Idle:   keepAliveIdle,
   295  		}
   296  	}
   297  	c := &TCPConn{conn{fd}}
   298  	if keepAliveCfg.Enable {
   299  		if preKeepAliveHook != nil {
   300  			preKeepAliveHook(fd)
   301  		}
   302  		c.SetKeepAliveConfig(keepAliveCfg)
   303  		if keepAliveHook != nil {
   304  			keepAliveHook(keepAliveCfg)
   305  		}
   306  	}
   307  	return c
   308  }
   309  
   310  // DialTCP acts like [Dial] for TCP networks.
   311  //
   312  // The network must be a TCP network name; see func Dial for details.
   313  //
   314  // If laddr is nil, a local address is automatically chosen.
   315  // If the IP field of raddr is nil or an unspecified IP address, the
   316  // local system is assumed.
   317  func DialTCP(network string, laddr, raddr *TCPAddr) (*TCPConn, error) {
   318  	switch network {
   319  	case "tcp", "tcp4", "tcp6":
   320  	default:
   321  		return nil, &OpError{Op: "dial", Net: network, Source: laddr.opAddr(), Addr: raddr.opAddr(), Err: UnknownNetworkError(network)}
   322  	}
   323  	if raddr == nil {
   324  		return nil, &OpError{Op: "dial", Net: network, Source: laddr.opAddr(), Addr: nil, Err: errMissingAddress}
   325  	}
   326  	sd := &sysDialer{network: network, address: raddr.String()}
   327  	c, err := sd.dialTCP(context.Background(), laddr, raddr)
   328  	if err != nil {
   329  		return nil, &OpError{Op: "dial", Net: network, Source: laddr.opAddr(), Addr: raddr.opAddr(), Err: err}
   330  	}
   331  	return c, nil
   332  }
   333  
   334  // TCPListener is a TCP network listener. Clients should typically
   335  // use variables of type [Listener] instead of assuming TCP.
   336  type TCPListener struct {
   337  	fd *netFD
   338  	lc ListenConfig
   339  }
   340  
   341  // SyscallConn returns a raw network connection.
   342  // This implements the [syscall.Conn] interface.
   343  //
   344  // The returned RawConn only supports calling Control. Read and
   345  // Write return an error.
   346  func (l *TCPListener) SyscallConn() (syscall.RawConn, error) {
   347  	if !l.ok() {
   348  		return nil, syscall.EINVAL
   349  	}
   350  	return newRawListener(l.fd), nil
   351  }
   352  
   353  // AcceptTCP accepts the next incoming call and returns the new
   354  // connection.
   355  func (l *TCPListener) AcceptTCP() (*TCPConn, error) {
   356  	if !l.ok() {
   357  		return nil, syscall.EINVAL
   358  	}
   359  	c, err := l.accept()
   360  	if err != nil {
   361  		return nil, &OpError{Op: "accept", Net: l.fd.net, Source: nil, Addr: l.fd.laddr, Err: err}
   362  	}
   363  	return c, nil
   364  }
   365  
   366  // Accept implements the Accept method in the [Listener] interface; it
   367  // waits for the next call and returns a generic [Conn].
   368  func (l *TCPListener) Accept() (Conn, error) {
   369  	if !l.ok() {
   370  		return nil, syscall.EINVAL
   371  	}
   372  	c, err := l.accept()
   373  	if err != nil {
   374  		return nil, &OpError{Op: "accept", Net: l.fd.net, Source: nil, Addr: l.fd.laddr, Err: err}
   375  	}
   376  	return c, nil
   377  }
   378  
   379  // Close stops listening on the TCP address.
   380  // Already Accepted connections are not closed.
   381  func (l *TCPListener) Close() error {
   382  	if !l.ok() {
   383  		return syscall.EINVAL
   384  	}
   385  	if err := l.close(); err != nil {
   386  		return &OpError{Op: "close", Net: l.fd.net, Source: nil, Addr: l.fd.laddr, Err: err}
   387  	}
   388  	return nil
   389  }
   390  
   391  // Addr returns the listener's network address, a [*TCPAddr].
   392  // The Addr returned is shared by all invocations of Addr, so
   393  // do not modify it.
   394  func (l *TCPListener) Addr() Addr { return l.fd.laddr }
   395  
   396  // SetDeadline sets the deadline associated with the listener.
   397  // A zero time value disables the deadline.
   398  func (l *TCPListener) SetDeadline(t time.Time) error {
   399  	if !l.ok() {
   400  		return syscall.EINVAL
   401  	}
   402  	return l.fd.SetDeadline(t)
   403  }
   404  
   405  // File returns a copy of the underlying [os.File].
   406  // It is the caller's responsibility to close f when finished.
   407  // Closing l does not affect f, and closing f does not affect l.
   408  //
   409  // The returned os.File's file descriptor is different from the
   410  // connection's. Attempting to change properties of the original
   411  // using this duplicate may or may not have the desired effect.
   412  func (l *TCPListener) File() (f *os.File, err error) {
   413  	if !l.ok() {
   414  		return nil, syscall.EINVAL
   415  	}
   416  	f, err = l.file()
   417  	if err != nil {
   418  		return nil, &OpError{Op: "file", Net: l.fd.net, Source: nil, Addr: l.fd.laddr, Err: err}
   419  	}
   420  	return
   421  }
   422  
   423  // ListenTCP acts like [Listen] for TCP networks.
   424  //
   425  // The network must be a TCP network name; see func Dial for details.
   426  //
   427  // If the IP field of laddr is nil or an unspecified IP address,
   428  // ListenTCP listens on all available unicast and anycast IP addresses
   429  // of the local system.
   430  // If the Port field of laddr is 0, a port number is automatically
   431  // chosen.
   432  func ListenTCP(network string, laddr *TCPAddr) (*TCPListener, error) {
   433  	switch network {
   434  	case "tcp", "tcp4", "tcp6":
   435  	default:
   436  		return nil, &OpError{Op: "listen", Net: network, Source: nil, Addr: laddr.opAddr(), Err: UnknownNetworkError(network)}
   437  	}
   438  	if laddr == nil {
   439  		laddr = &TCPAddr{}
   440  	}
   441  	sl := &sysListener{network: network, address: laddr.String()}
   442  	ln, err := sl.listenTCP(context.Background(), laddr)
   443  	if err != nil {
   444  		return nil, &OpError{Op: "listen", Net: network, Source: nil, Addr: laddr.opAddr(), Err: err}
   445  	}
   446  	return ln, nil
   447  }
   448  
   449  // roundDurationUp rounds d to the next multiple of to.
   450  func roundDurationUp(d time.Duration, to time.Duration) time.Duration {
   451  	return (d + to - 1) / to
   452  }
   453
View as plain text